Food waste management is a big problem in all countries, especially affluent ones. There are numerous places which generate large amounts of food waste including hotels, restaurants, malls, residential societies, canteens, airline caterers, markets etc. A proper food waste management strategy needs to be devised for them to make sure that either they are disposed off in a safe manner or utilized efficiently.
Biogas from Food Waste
The feedstock for the food waste-based biogas plant includes leftover food, vegetable refuse, stale cooked and uncooked food, meat, teabags, napkins, extracted tea powder, milk products etc. Raw waste is shredded to reduce to its particle size to less than 12 mm. The primary aim of shredding is to produce a uniform feed and reduce plant “down-time” due to pipe blockages by large food particles. It also improves mechanical action and digestibility and enables easy removal of any plastic bags or cling-film from waste.
Fresh waste and re-circulated digestate (or digested food waste) are mixed in a mixing tank. The homogenized waste stream is pumped into the feeding tank, from which the anaerobic digestion system is continuously fed. Feeding tank also acts as a pre-digester and subjected to heat at 55-600C to eliminate pathogens and to facilitate the growth of thermophilic microbes for faster degradation of waste.
From the predigestor tank, the slurry enters the main digester where it undergoes anaerobic degradation by a consortium of Archaebacteria belonging to Methanococcus group. The anaerobic digester is a CSTR reactor having average retention time of 15 – 20 days. The digester is operated in the mesophilic temperature range (33 – 38°C), with heating carried out within the digester.
As per conservative estimates, each ton of food waste produces 150 – 200 m3 of biogas, depending on reactor design, process conditions, waste composition etc. Biogas contain significant amount of hydrogen sulfide (H2S) gas which needs to be stripped off due to its corrosive nature.
Biogas is eventually utilized in a combined heat and power (CHP) unit for its conversion into thermal and electrical energy in a cogeneration power station of suitable capacity. The exhaust gases from the CHP unit are used for meeting process heat requirements. The digested substrate leaving the reactor is rich in nutrients like nitrogen, potassium and phosphorus which are beneficial for plants as well as soil.
Salman is a prolific environmental writer, and has authored more than 500 articles in reputed journals, magazines and websites. He is proactively engaged in creating mass awareness on renewable energy, waste management, sustainability and conservation all over the world.
Salman can be reached on email@example.com
Latest posts by Salman Zafar (see all)
- Environmental Footprint of the Sochi Olympics - September 20, 2019
- Mobile App Marketing Mistakes and What to Do Instead - September 19, 2019
- Waste to Energy in Jordan - September 18, 2019
Republished by Blog Post Promoter