scrap-tires-recycling

Everything You Should Know About Crumb Rubber

Management of waste tyres is a challenging task because tyres have a long life and are non-biodegradable. The traditional method of waste tyres management have been stockpiling or illegally dumping or landfilling, all of which are short-term solution. Stockpiled tyres provide perfect breeding grounds for mosquitoes, vermin and snakes. Crumb rubber is a term usually applied to recycled rubber from automotive and truck scrap tires. There are two major technologies for producing crumb rubber – ambient mechanical grinding and cryogenic grinding.

Ambient mechanical grinding

In ambient mechanical grinding process, the breaking up of scrap tires happens at or above normal room temperature. Ambient grinding is a multi-step technology and uses whole or pre-treated car or truck tires in the form of shred or chips, or sidewalls or treads. The rubbers, metals and textiles are sequentially separated out.

Tires are passed through a shredder, which breaks the tires into chips. The chips are fed into a granulator that breaks them into small pieces while removing steel and fiber in the process. Any remaining steel is removed magnetically and fiber through a combination of shaking screens and wind sifters.

Finer rubber particles can be obtained through further grinding in secondary granulators and high-speed rotary mills. Ambient grinding is the production process used by the majority of crumb producers. The machines most commonly used for fine grinding in ambient plants are:

  • Secondary granulators
  • High speed rotary mills
  • Extruders or screw presses
  • Cracker mills

crumb-rubber

 

Cryogenic grinding

Cryogenic grinding refers to the grinding of scrap tires at temperatures near minus 80oC using liquid nitrogen or commercial refrigerants. Cryogenic processing generally uses pre-treated car or truck tires as feedstock, most often in the form of chips or ambiently produced granulate. Processing takes place at very low temperature using liquid nitrogen or commercial refrigerants to embrittle the rubber.

It can be a four-phase system which includes initial size reduction, cooling, separation, and milling. The material enters a freezing chamber where liquid nitrogen is used to cool it from –80 to –120 °C, below the point where rubber ceases to behave as a flexible material and can be easily crushed and broken.

scrap-tires-recycling

Because of its brittle state, fibres and metal are easily separated out in a hammer mill. The granulate then passes through a series of magnetic screens and sifting stations to remove the last vestiges of impurities. This process requires less energy than others and produces rubber crumb of much finer quality.

Both ambient and cryogenic processing can be repeated to produce finer particles. Increasingly, the two with their attendant technologies, are combined into one continuous system in order to benefit from the advantages and characteristics of each and to reduce overall costs. The ambient system is generally used for the initial size reduction phases.

The cryogenic system is used to further reduce the material in size and then to remove the metals and textiles. The outputs from either or both systems can be used directly or as feedstock for further processing. Of the two, cryogenic process is more expensive but it produces smoother and smaller crumbs.

Uses of Crumb Rubber

Crumb rubber is sold as feedstock for chemical devulcanization or reclamation (pyrolysis) processes, added to asphalt for highway paving and pavement sealers, or used for the production of a large number of recycled rubber-containing products. Some of the major applications of crumb rubber are as follows:

sports-board

Sport Surfaces

  • Kindergarten Playgrounds and Recreation Areas
  • School Sports Areas
  • Athletic Tracks
  • Tennis and Basketball Courts

Automotive Industry

  • Bumpers
  • Splash Guards and Fenders
  • Floor Mats for Cars and Trucks
  • Floor Liners for Trucks and Vans

Construction

  • Hospital, Industrial, and Bathroom Flooring
  • Floor Tile
  • Foundation Waterproofing
  • Dam, Silo, and Roof Liners

Geotechnical/Asphalt Applications

  • Rubberized Asphalt for Roads and Driveways
  • Drainage Pipes
  • Soil Conditioner
  • Porous Irrigation Pipes
  • Road Building and Repair

Adhesives and Sealants:

  • Adhesives and Sealing Compounds
  • Textured and Non-Slip Paints
  • Roof Coating and Waterproofing

Shock Absorption and Safety Products

  • Shock Absorbing Pads for Rails and Machinery
  • Sound Barriers for Highways
  • Abrasion Lining in Mining Equipment

Rubber and Plastic Products

  • Pipe Insulation and Lining
  • Garbage Cans
  • Shoe Soles and Heels
  • Wire and Cable Insulation
Salman Zafar

4 thoughts on “Everything You Should Know About Crumb Rubber

Your Thoughts

This site uses Akismet to reduce spam. Learn how your comment data is processed.