At some point in our lives, we’ve all seen bootlace ferrules, but most of us didn’t recognize them. These are copper tubes commonly used for ensuring a reliable internet connection at the end of wires. They’re used in a wide range of different applications and come in many different sizes and types.
Let’s get to know about them.
Main types of Bootlace Ferrules
When it comes to bootlace ferrules, there are two main types. One is known as insulated bootlace ferrules, and the other is called uninsulated bootlace ferrules.
Insulated ones are generally recognized by their colorful insulation sleeve, while uninsulated ones do not have any sleeves.
Now the most common type of bootlace ferrules is the insulated bootlace ferrules, mainly because they’re available in not one but two versions.
The singular version of insulated bootlace ferrules is suitable for one cable end, whereas the TWIN version is essential if you plan to bundle two cable ends in a single bootlace ferrule.
How to use Bootlace Ferrules?
Using this tool is as easy as anything. Just follow the steps below, and you’ll be a pro in using bootlace ferrule in no time!
First, strip the end of the cables to make the loose copper wires visible. One thing to note- don’t twist the wires- that might cause serious damage to them.
Once the loose wires are out, slide them into the bootlace ferrule and take it through the whole device until you can see them almost sticking out on the other side.
Now use your crimping tool and crimp the bootlace ferrule to make sure it’s a tight and perfect fit around the wires. If you’re using insulated ferrules, you’ll have to crimp the tin part and not the colored bit. Once the crimping is done- you have the job well done!
What are Bootlace Ferrules used for?
Bootlace ferrules are generally used for creating optimal electrical contact between a stripped cable and the bootlace ferrule device itself.
In a situation where a cable reaches the end and needs to be extended- bootlace ferrules can be your savior.
It’s because when you’re extending a cable and the loose wires are not bundled and well-protected, it might damage them. Open copper wires can be risky to people as well!
In order to prevent any safety hazards, you need bootlace ferrules connected to the loose wires to protect both the copper wire and yourself!
Where are Bootlace Ferrules used?
These are essential safety tools used in different applications to improve connection reliability like control panels, boxes, circuit breakers, etc.
They’re pretty essential in commercial and industrial applications where there are safety risks. Bootlace Ferrules are also widely known as Cord-End Terminals, mainly in the American regions.