If you don’t have a garage door safety cable, you should get one. There is a reason they exist. The springs can easily cause accidents if you don’t take enough caution. First off, the safety cables are designed to keep a broken garage door spring from sailing around the place. They also provide enough force to lift and lower the door. This means they can protect you, your family, and your property from any spring problem.
Continue reading to find out why you need to get a safety cable.
Safety cables are like door cables but lighter. You can have a professional easily install them for you since it’s not an easy DIY task. Garage doors are quite heavy. The springs, therefore, help in raising and lowering it with ease. With time and due to different weather conditions, they can break without a warning. The damage can cause the spring to snap. Unless you despise your car and don’t mind losing it, it will hurt a lot when the spring collides with it. If it breaks, it is advisable to hire a hand to fix or replace it. This means when you get a garage door spring safety cable kit, you will need skilled hands such as those at Fix Garage Doors CA to pull off the project.
Why You Should Hire a Professional for Setup
The safety cable comes in a kit. All you must do is ensure you have the right list of items you need present in the kit. The cable can hold the springs in place to avoid snapping. You might not know where the danger lies while installing, but a professional would. It is their job to take such risks; they are trained for it. Any concern with the kit may result in major injury or death.
Aside from safety, having your appliances replaced by an expert company saves you time and energy, so you can engage in other tasks. A professional will do it right, and it will save you from having to buy other things that you could potentially damage during installation. Moreover, a repair company has certified technicians and a warranty.
The Installation Process
Because the process is so straightforward, you could find yourself pondering whether or not you should put it in by yourself. If that is the case, the first thing you need to do is acquire a sturdy ladder. While you’re at it, be sure to keep an eye on the other components of the door, and avoid pulling the cable until it’s completely taut. You should keep in mind that installing the kit by yourself is dangerous, and there is a possibility that you could injure yourself or incur additional losses. The following are some straightforward steps that can be taken:
- Thread the open end of the cable through a hole in the horizontal metal garage door frame near where the cable from the moveable pulley’s cable attaches. A hole closest to your garage door opening is best to minimize binding.
- Thread it up and through the center of the spring.
- Finally, thread the cable through a hole in the upper vertical metal spring support near the spring. Loop it back and ensure you tighten it with a cable clamp.
Other Types of Garage Door Cables
The installation process is determined by the type of spring system that is present in your garage. In addition to spring safety cables, there are two other types of cables that you have the option of installing, and they are as follows:
- Extension springs: the cables run along the door on both sides of the upper track and require extended spring cables to function.
- Torsion springs: they begin and meet at both ends and must be cable-secured.
Wear and Tear Spring Maintenance
Inspecting the cables from time to time can save you from unplanned costs. They erode after some time. It is possible for them to break because other metals run near the cables that are bound to catch rust. If they are worn out, you must replace them immediately. That’s why you should check them frequently or have an expert do it. You might ignore something as trivial as a single damaged spring, which later could result in serious damage. Above all, if you want to increase the longevity of your garage door, then perform occasional maintenance. Here is how you can ensure its safety:
- Replace worn-out springs to avoid snap-offs and damage.
- Install a safety cable kit to protect yourself and your family.
Seek an expert’s help for the installation of the safety cable. If you DIY, you can cause further malfunctions.