Pallet racking is an aspect of many industries that’s critical, although not very exciting. Having a good pallet racking system is just as important as many other aspects of a business. When developing a pallet racking system, it’s imperative that you consider the types of products being stored, the design of the rack and different size variables. These are not elements that can be taken lightly because they’re a key part of materials and product handling. The information below will help you better understand guidelines that should be followed for Sunshine Coast pallet racking.
1. Weight and Size of Products
One of the most important aspects of pallet racking is the weight and size of the products being stored. That’s because there is typically a safety element built into racks to accommodate specific weights and sizes. If a rack is chosen and it is not intended to accommodate the size of products stored, there’s a good chance that issues will arise down the road. This is especially the case when you have oversized or abnormally sized products. The weight and size of products must remain a primary consideration for many reasons.
2. Pallet Construction
It’s imperative to ensure the construction of a pallet is appropriate for the type of rack being used. Since there are many different possibilities for pallet sizes, this is not an area of pallet racking that can be taken for granted. You’ll need to ensure the pallet construction does not result in product overhangs. In some instances, it’s necessary to expand the depth or width of the racks to accommodate pallet construction. It’s possible to revisit the dimensions of pallet construction to make adjustments.
3. Egress Path
The egress path, which is the distance required to exit a building, is a key consideration in pallet racking. This is because there are governmental codes and requirements related to fire and safety that impact the design of pallet racks. In a warehouse environment, the design of racks must accommodate the egress path. In some instances, signs and reflective tape can be used to satisfy requirements. Given the potential danger of not having a sufficient egress path, adherence to governmental codes and requirements is imperative.
4. Concrete Floor Specifications
The specifications of the concrete floor where the pallet rack is positioned must be considered because concrete slab can only support a certain amount of weight. In the event that the products weighed more than the concrete floor specifications allow, it’s possible to resolve the issue with footplates, which are used to spread the load. This is just one example of a potential solution when problems arise during the installation of shelving systems.
5. Seismic Classification
Another important pallet racking consideration is related to the seismic classification, which is determined by the motion of the ground if an earthquake occurs. This classification must be considered when developing internal pallet racking guidelines to ensure the safety of personnel. The seismic classification will vary from one business address to another.
6. Sprinkler Requirements
There is a sprinkler requirement that’s contingent upon the types of products being stored in a racking system. It’s possible to have an in-rack sprinkler system installed to accommodate insurance company requirements. There may be a certain number of sprinklers required based on rack distance. In some instances, special bracing is used when additional sprinklers are necessary.
7. Pallet Rack Accessories
There are accessories available to accommodate the varied needs of different industries. For instance, there are accessories available to protect columns, support bars and guard the end of each aisle. The specific types of accessories needed to accommodate requirements and regulations will typically require an evaluation by experts to understand the facility and products.
When choosing a pallet racking system, it’s imperative that you also focus on the quality of the racks. There are a wide range of quality racking systems on the market from which to choose, such as steel racking structures and cold formed steel structures, among others. Experienced professionals can help you understand how to maximize your storage to boost the efficiency of your operations while complying with regulations and adhering to safety standards.